Texecom PREMIER 168 Скачать руководство пользователя страница 46

Страница: 46 / 64

Programming the Alarm System

Premier Series

Master User Guide

INS177

User Options 1

This menu defines which options are available to the user when their code is entered.
This menu is not available to all users.

Press

to scroll through the options and press

to select them or use keys

(‘Letter’ = option

selected, ‘Star’ = option is

NOT

selected).

The following options are available:

A - Arming

Areas assigned to the selected user can be armed.

D - Disarming

Areas assigned to the selected user can be disarmed.

O - Omitting

Zones assigned to the same areas as the selected user can be omitted, providing that

they have the ‘Omit’ attribute assigned to them.

R - Eng. Reset (Engineers only)

Areas programmed as ‘Engineer Reset’ can be reset after an Alarm has occurred.

a - Local Arming (not on

Premier 24

)

The User can only arm areas that the keypad is assigned to.

d - Local Disarm (not on

Premier 24

)

The User can only disarm areas that the keypad is assigned to, or areas that are in entry or
alarm (provided that the code has that area assigned to it).

Y - Auto ‘YES’

After a code is entered, pressing

to confirm the next action is not required.

F - Disarm First (not on

Premier 24

)

If an area is armed and the user enters their code, the ‘Disarm’ option is displayed first.

The following attributes are only available on the

Premier 24

Some of the following options may not always be selectable or de-selectable

T - Lock TAG = PGM2

The Users TAG is disabled whenever PGM2 is active.

C - Lock Code = PGM3

The Users code is disabled whenever PGM3 is active (default = during the Entry mode).

U - Lock User = PGM4

The Users TAG and Code is disabled whenever PGM4 is active (default = Control Timer 4).

O - Open/Close

The selected user will report open (disarm) and close (arm) events to an Alarm Receiving
Centre every time they arm or disarm.

Содержание PREMIER 168

































































Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды

Texecom PREMIER 168, Руководство пользователя

Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды