manualshive.com logo in svg

Texecom PREMIER 168, Руководство пользователя

Поделиться
Скачать
Texecom PREMIER 168 Скачать руководство пользователя страница 10

Overview 

Premier Series 

Master User Guide 

10 

INS177 

 Zone Faults During Arming 

Before attempting to arm the system, ensure that the premises are secure (all doors and 
windows closed etc.) and the Ready light is on. 

If an attempt is made to arm the system with any zones active (e.g. door ajar, open 

window, etc.) the internal sounders will bleep repeatedly (fault tone) and the display will 
show the zones that are active. 

O(1,$>>A$%/3.-,

*&(13$H((&

 

The fault tone will stop and the exit tone will resume when all zones are secure. If it is 
necessary to leave a zone open then it must be omitted (see page 21 for details). 

!"

If an active zone cannot be secured then it may be ‘in fault’ in this case contact the 
alarm company immediately. 

Arm Fail - Failing to Arm 

If the exit procedure is started and zones are still ‘Active’ at the end of the exit procedure, 
an Internal alarm will occur (internal sounders only) and the strobe light on the external 
sounder will flash. 

!"

If this occurs the arm fail must be cleared and the zone in fault identified before the 
system can be armed (see page 18 for details on clearing an Arm Fail).  

The Ready LED 

To help prevent faults during arming, a Ready light has been provided. The Ready light 
works as follows: 

• 

If the 

Ready

 light is 

ON

 then all zones are secure and the system is ready to be armed 

• 

If the 

Ready

 light is 

OFF

  then  one  or  more  zones  are  active,  either  secure  or  omit 

these zones before proceeding 

• 

If the 

Ready

 light is 

FLASHING

 then the system has zones (with the ‘Force Omit’ 

attribute) that are active, check these zones before proceeding. 

Содержание PREMIER 168

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды