Premier Elite ComIP
Installation Manual
12
INS273-6
•
Press
/
and then enter the six digit XXXXXX
Account Number
you were given in the
app
•
Press
/
then
/
(
Dial Attempts
) enter a minimum of
2
•
Press
/
twice
•
Press
/
and edit the
Areas
you wish to receive notifications for.
•
Press
/
then
/
and toggle the reporting options on or off, depending on what
you want to receive notifications of. Use the
/
button to toggle each option on or off.
•
Press
/
then
/
and scroll across the screen and use the
/
button to
toggle option 7
Connect Via IP
ON (an
I
will be shown on the screen)
•
If you chose
SIAII
as the
Protocol
in previous steps scroll once more to Option 8 and toggle
Send SIA Text
to ON (a
T
will be shown).
•
Press
/
DO NOT EXIT ENGINEERS MODE YOU
MUST
SETUP POLLING FOR THE SYSTEM TO WORK
CORRECTLY.
Control Panel Setup for Polling
To setup the Control Panel for Polling do the following:
•
Press
/
twice
•
Press
then
/
twice (
Global Options/System Timers
)
•
Scroll to
Poll IP Every
•
Press
/
and then enter a value 15 minutes (015).
The polling time is controlled by the server and may be changed.
Enable Digi, Dial All Numbers & Test Call
To test the settings, initialize a Push Notification and update the IP address in the app a test call
should be carried out. Please ensure the
Digi is Enabled, Dial All Numbers
is enabled for systems
with multiple communication devices installed.
Digi Enabled & Dial All Numbers
If you have more than one communication device connected to the control panel,
Dial All Numbers
MUST be enabled; continuing from the previous steps:
•
Press
/
then
(Digi Options)
•
Press
/
then
/
scroll through the options and ensure
Digi is Enabled
(
E
shown
on Screen) and
Dial All Numbers
(
A
shown on screen)are on, Use the
/
button to
toggle each option on or off.
•
Press
/
Initialise a Test Call
•
Press
/
then
/
(Start Test Call)
•
Press
to start the test call. All communication devices on the system will carry out a test
call.
Once completed and if successful you will receive a notification from the Control Panel to the app.
Do not exit Engineers mode yet. Please read below:
Optional Additional Panel Settings
Due to the nature of routers and services provided by the ISP, devices of all types can just "drop off"
a network, certain circumstance may cause an ATS Failure to be displayed to the end user. The
