Texas Instruments TPS6101xEVM-157, Руководство пользователя

Страница: 11 / 16

2-1 Evaluation With the TPS6101xEVM-157
Evaluation With the TPS6101xEVM-157
This chapter details the evaluation process and features of the EVM. For this
evaluation, a load is connected to the output terminal in order to adjust the load
current between 0 mA and 250 mA.
For accurate output voltage and input voltage measurements, it is important
to measure the voltage on the input and output voltage terminals with kelvin
contacts or with a voltmeter connected directly to the input voltage or output
voltage terminals. This will eliminate any measurement errors related to
voltage drops along the input and output terminal wires connected to the
power supply or load.
The EVM has additional pins to allow the user to assemble an additional output
capacitor, C5, onto the PCB for further evaluation purposes.
Topic Page
2.1 Enable (EN) Jumper 2–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Auto Discharge Enable (ADEN) Jumper 2–2 . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 LBI/LBO Comparator 2–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2