Texas Instruments TPS6101xEVM-157, Руководство пользователя, Страница: 9 / 16

SLVP157 Bill of Materials
1-3 Introduction
1.3 SLVP157 Bill of Materials
Table 1–2 lists materials required for the SLVP157 EVM. More details about
the design and component selection for the dc-dc converter can be found in
the data sheet (SLVS314).
Table 1–2. SLVP157 EVM Bill of Materials
Ref Des Qty Part Number Description MFG
C1 1 C3216X5R0J106 Capacitor, 10
µ
F, X5R, 6.3 V, SMD 1206 TDK
C2 1 Capacitor, 10 pF, X7R, SMD 0805
C3 1 Capacitor, 10 nF, X7R, SMD 0805
C4 1 C4532X5R1A226M Capacitor, 22
µ
F, X5R, 6.3 V, SMD 1812 TDK
C5 Not Used
J1, J2 1 Header 1 x 3, 0.1” pitch, with jumper
L1 1 CDRH6D38-100 Coil Sumida
R1 1 Resistor, 100 k
Ω
, 1%, SMD 0805
R2 1 Resistor, 1 M0, 1%, SMD 0805
Not used with fixed output voltage versions
R3 1 Resistor, 180 k
Ω
, 1%, SMD 0805
Not used with fixed output voltage versions
R4 1 Resistor, 1 M0, 1%, SMD 0805
R5 1 Resistor, 390 k
Ω
, 1%, SMD 0805
R6 1 Resistor, 470 k
Ω
, 1%, SMD 0805
GND, LBO 2 Test points
INPUT,
OUTPUT 2 Header 1 x 4, 0.1” pitch
U1 1
TPS61010DGS IC, high-efficiency boost converter,
adjustable version, MSOP10 Texas Instruments
TPS61013DGS IC, high-efficiency boost converter,
2.5-V fixed output voltage version, MSOP10 Texas Instruments
TPS61015DGS IC, high-efficiency boost converter,
3-V fixed output voltage version, MSOP10 Texas Instruments
TPS61016DGS IC, high-efficiency boost converter,
3.3-V fixed output voltage version, MSOP10 Texas Instruments