
Operation
9
SLVUAP7A – April 2016 – Revised September 2016
Copyright © 2016, Texas Instruments Incorporated
TPS25740EVM-741 and TPS25740AEVM-741 Evaluation Module User
Guide
5
Operation
Use the following steps for EVM operation:
1. Turn on the input power supply to 12 V.
2. Connect the UFP to the TPS25740 and TPS25740A EVM through a type C cable.
3. Make desired voltage requests from the UFP to TPS25740 and TPS25740A EVM.
4. Connect load between J2 and J5 as desired to test efficiency and other performance.
6
Test Results
This section provides typical performance waveforms for the TPS25740EVM-741 and TPS25740AEVM-
741 with VIN = 12 V at no load (unless otherwise specified). Actual performance data is affected by
measurement techniques and environmental variables; therefore, these curves are presented for
reference and may differ from actual results obtained.
Figure 6. UFP Plug-In (5 V)
Figure 7. UFP Unplug (5 V)
Figure 8. UFP Unplug (12 V)
Figure 9. UFP Unplug (20 V)