TLV320AIC3109EVM Software
17
SLAU738 – September 2017
Copyright © 2017, Texas Instruments Incorporated
TLV320AIC3109EVM-K
4.4
Bypass Paths
The
Bypass Paths
tab shows the active and passive bypass paths available for control.
The passive analog bypass paths allow the inputs to be routed straight through the device to the outputs
without turning on any of the internal circuitry. This provides a signal path through the device with minimal
power consumption.
The active bypass paths allow the inputs to bypass the ADC and DAC functional blocks and be routed to
the analog output mixers to be summed into the output amplifiers. The
Bypass Paths
tab is shown in
Figure 10. Bypass Paths
