Software Overview
10
SLAU694 – December 2016
Copyright © 2016, Texas Instruments Incorporated
TAS5780M Evaluation Module
3.4
Direct I
2
C
The I/O tab in the Direct I
2
C has two sub sections. The Input section has the provision to enter the read or
write commands scripts. Clicking the Execute button will execute the commands written in the Input
section. The status of the execution is displayed in the
Output
section as shown in
The Checksum button on the right is used to compute the checksum value of a cfg file. Load a cfg file by
clicking the
Checksum
button and then the computed XOR and CRC checksum will show on the
Output
section
Figure 9. Direct I
2
C Page, I/O Tab