background image

Table of Contents

30

TABLE OF CONTENTS

1.

INTRODUCTION

1.1. PREFACE .................................................................................. 1-1

1.2. KEY FEATURES ........................................................................ 1-1

1.3. PERFORMANCE LIST ............................................................... 1-2

1.4. BLOCK DIAGRAM ..................................................................... 1-3

1.5. INTRODUCE THE PCI - BUS ..................................................... 1-4

1.6. FEATURES ................................................................................ 1-5

1.7. What is AGP ? ........................................................................... 1-5

2.

SPECIFICATION

2.1. HARDWARE .............................................................................. 2-1

2.2. SOFTWARE .............................................................................. 2-2

2.3. ENVIRONMENT......................................................................... 2-2

3.

HARDWARE INSTALLATION

3.1. UNPACKING.............................................................................. 3-1

3.2. MAINBOARD LAYOUT............................................................... 3-2

3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS ........... 3-2

3.4. DRAM INSTALLATION............................................................... 3-6

3.5. SRAM INSTALLATION............................................................... 3-6

Sync. SRAM (Pipeline Burst SRAM) ........................................... 3-6

3.6. CPU INSTALLATION AND JUMPERS SETUP............................ 3-6

3.7. CMOS RTC & ISA CFG CMOS SRAM........................................ 3-7

3.8. SPEAKER CONNECTOR INSTALLATION ................................. 3-7

3.9. ACPI LED & KEY LOCK CONNECTOR INSTALLATION ............ 3-7

Summary of Contents for 5SG100




















Reviews: