Texas Instruments Stellaris LM3S9D90, Руководство пользователя

Страница: 8 / 32

Stellaris® LM3S9D90 Evaluation Kit Overview
8 July 5, 2011
Kit Contents
The EK-LM3S9D90 evaluation kit comes with the following:
„
EK-LM3S9D90 evaluation board
„
In-Circuit Debug Interface (BD-ICDI) board
– Connects to USB port on PC and to 10-pin, fine-pitch ARM JTAG connector on the
EK-LM3S9D90 evaluation board
– Secondary 8-pin Power/UART connector provides power and virtual comm-port capability
to the EK-LM3S9D90 evaluation board.
„
Cables
– USB miniB to USB-A cable
– USB-OTG to USB-A cable
– 10-pin ribbon cable for JTAG/SWD connection
– 8-pin ribbon cable for Power/UART connection
„
CD containing:
– A supported version of one of the following (including a toolchain-specific Quickstart
guide):
• Keil™ RealView® Microcontroller Development Kit (MDK-ARM)
• IAR Embedded Workbench
• Sourcery CodeBench development tools
• Code Red Technologies development tools
• Texas Instruments’ Code Composer Studio™ IDE
– Complete documentation
– Quickstart application source code
– Stellaris® Firmware Development Package with example source code
Using the EK-LM3S9D90
The recommended steps for using the EK-LM3S9D90 evaluation kit are:
1. Follow the Quickstart guide included in the kit. The Quickstart guide will help get the
EK-LM3S9D90 Evaluation Board up and running in minutes.
2. Use your preferred ARM tool-chain and the Stellaris Peripheral Driver Library to
develop an application.
Software applications are loaded using the BD-ICDI board. See
Chapter 3, “Software Development,” for the programming procedure. The StellarisWare
Peripheral Driver Library Software Reference Manual contains specific information on
software structure and function.
3. Customize and integrate the hardware to suit an end application. This user's manual is an
important reference for understanding circuit operation and completing hardware modification.
Features
The EK-LM3S9D90 evaluation kit provides the following features: