9 CLI Version
The CLI tool provides a traditional command line version of the Radio Tool. This version is especially useful when performing large-scale automated
testings. The RadioToolCLI.exe application is in the RadioToolApplication directory. Use CMD or batch files to execute the commands.
Usage: RadioToolCLI -X [-P=port] [-B=baud] [-M] [-F] [-T|-R|-POW]
RadioToolCLI [-h|--help] [-i|--info]
Options:
Miscellaneous:
-h, --help Shows this message
-i, --info Shows RadioToolCLI and radio tool library version and information.
-v increase debug message verbosity
Device Connection:
-X, --target=TARGET The TARGET testing device. 0:CC3120 SPI, CC3135 SPI, 1:CC3120 UART,CC3135 UART 2:CC32X0
UART,CC3235 UART. REQUIRED. Range: [0, 2]. Default: 1
-P, --port=VALUE The port number of the target testing platform.
Required for UART connections. Range: [0, 255].
-B, --baud_rate=BAUD RATE The BAUD RATE of the target COM port.
Required for UART connections. Range: [0, Int32.MaxValue].
-M, --mac Returns the MAC address
-C, --new_mac=VALUE Set device MAC address WITHOUT colons. For example, if the MAC address is 01:23:45:67:89:
AB, enter 0123456789AB instead. Case insensitive.
-F, --firmware Returns the firmware version and CC32xx application version (if applicable) in the
following order:
Chip ID, ROM version, Firmware version, Host Driver version, CC32xx App version, MAC
address.
Common for TX and RX:
-t, --duration=DURATION RX/TX Testing DURATION in seconds for -T and -R options. Range: [1, 65535]. Default: 1
-c, --channel=CHANNEL RX/TX Testing CHANNEL for -T and -R options. Range: 2.4GHz[1, 13] 5GHz[36-169]. Default:
1
-k, --enable_acks TX ACKs enabling(For Rx mode). Default: disabled.
TX (Transmission):
-T, --tx TX testing for Continuous or Packetized.
-z, --tx_type=TX_TYPE TX Testing TX_TYPE. 1:Continuous, 2:Packetized, 3:CW. 'tone_offset' option can be used if
and only if CW is chosen. Range: [1, 3]. Default: 1.
-w, --power=POWER TX POWER attenuation for Continuous and Packetized testing. 0 being the maximum power and
15 being the minimum power.Range: [0, 15]. Default: 0
-f, --tone_offset=TONE_OFFSET
TX TONE_OFFSET for CW testing only. A value of N means tone at offset N*312.5kHz.
Range: [-25, 25]. Default: 0
-m, --rate, --modulation=MODULATION
TX Testing rate (with the corresponding MODULATION). Range: [1, 20]. Default: 1 (1Mbps
DSSS).
1: 1 Mbps (DSSS)
2: 2 Mbps (DSSS)
3: 5.5 Mbps (CCK)
4: 11 Mbps (CCK)
5: NOT SUPPORTED
6: 6 Mbps (OFDM)
7: 9 Mbps (OFDM)
8: 12 Mbps (OFDM)
9: 18 Mbps (OFDM)
10: 24 Mbps (OFDM)
11: 36 Mbps (OFDM)
CLI Version
16
SimpleLink™ Wi-Fi® CC3x20, CC3x3x Radio Tool User Guide
SWRU471B – FEBRUARY 2017 – REVISED AUGUST 2020
Copyright © 2020 Texas Instruments Incorporated
