Texas Instruments SimpleLink Wi-Fi CC3 20 Series, Руководство пользователя

Страница: 11 / 24

7.3 GUI RX Testing
RX testing is used for gathering Wi-Fi statistics in the air within a specified channel in case of external antenna.
While using RF connector for accurate RF tests the packets will be accepted by the RF connected path.
Duration: Statistics gathering time can be specified with a fixed duration, or 0 to make the testing time indefinite,
until the user presses the STOP button. Statistics are gathered automatically whenever the RX testing is
stopped. However, users may choose to gather the statistics any time before RX testing ends by clicking the Get
Statistics button.
Table 7-3 lists fields explanations.
Table 7-3. Fields Explanation
Field Description
Valid Valid packets
Addr Mismatch Packets with address mismatch
FCS Error Frame Check Sequence error
Mang frame Average RSSI in management frames
DataCtrl frame Average RSSI in Data Control frames
Figure 7-3 lists the RadioTool GUI in the RX Tab.
Figure 7-3. RadioTool GUI in RX Tab
www.ti.com Running the RadioTool GUI
SWRU471B – FEBRUARY 2017 – REVISED AUGUST 2020
Submit Document Feedback
SimpleLink™ Wi-Fi® CC3x20, CC3x3x Radio Tool User Guide 11
Copyright © 2020 Texas Instruments Incorporated