Texas Instruments PCM5122/42EVM-U, Руководство пользователя

Страница: 12 / 24

CodecControl Software
www.ti.com
3.4.2 Command Dialog
Open the command dialog (View->Command…) to write, edit, load, save, and run command scripts.
Command scripts are text files that contain commands to communicate with the TI audio codec. The
syntax is described in
Section 3.5 . The command dialog is shown in Figure 4 .
Figure 4. Command Dialog
• The primary area of the command dialog is the command buffer (editable text) which contains the
command script. Clicking the Run button runs the command script.
• The smaller, read-only text area on the right side of the command dialog displays control data read
from the TI audio codec. The Clear button clears the Read Data field.
• The one-line text edit field on the left bottom allows single command execution.
• The Record check box enables recording of commands generated by the control software.
12 PCM5122/42EVM-U SLAU444 – May 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated