Texas Instruments MSP-FET430 Скачать руководство пользователя страница 14

Страница: 14 / 95

Get Started Now!

1-2

1.1 Kit Contents, MSP-FET430X110

One READ ME FIRST document.

One MSP430 CD-ROM.

One MSP-FET430X110 Flash Emulation Tool. This is the PCB on which is

mounted a 20-pin ZIF socket for the MSP430F11xIDW,
MSP430F11x1AIDW, or MSP430F11x2IDW device. A 25-conductor cable
originates from the FET.

One small box containing two MSP430F1121AIDW device samples.

1.2 Kit Contents, MSP-FET430Pxx0 (‘P120, ‘P140, ‘P410, ‘P430, ‘P440)

One READ ME FIRST document.

One MSP430 CD-ROM.

One MSP-FETP430IF FET Interface module. This is the unit that has a 25-pin

male D-Sub connector on one end of the case, and a 2x7 pin male
connector on the other end of the case.

MSP-FET430P120: One MSP-TS430DW28 Target Socket module. This is the

PCB on which is mounted a 28-pin ZIF socket for the MSP430F12xIDW or
MSP43012x2IDW device. A 2x7 pin male connector is also present on the
PCB.

MSP-FET430P140: One MSP-TS430PM64 Target Socket module. This is the

PCB on which is mounted a 64-pin clam-shell-style socket for the
MSP430F13xIPM, MSP430F14xIPM, MSP430F15xIPM, MSP430F16xIPM,
or MSP430F161xIPM device. A 2x7 pin male connector is also present on
the PCB.

MSP-FET430P410: One MSP-TS430PM64 Target Socket module. This is the

PCB on which is mounted a 64-pin clam-shell-style socket for the
MSP430F41xIPM device. A 2x7 pin male connector is also present on the
PCB.

MSP-FET430P430: One MSP-TS430PN80 Target Socket module. This is the

PCB on which is mounted an 80-pin ZIF socket for the MSP430F43xIPN
device. A 2x7 pin male connector is also present on the PCB.

MSP-FET430P440: One MSP-TS430PZ100 Target Socket module. This is the

PCB on which is mounted a 100-pin ZIF socket for the MSP430F43xIPZ or
MSP430F44xIPZ device. A 2x7 pin male connector is also present on the
PCB.

One 25-conductor cable.

One 14-conductor cable.

MSP-FET430P120: Four PCB 1x14 pin headers (Two male and two female).

MSP-FET430P140: Eight PCB 1x16 pin headers (Four male and four female).

MSP-FET430P410: Eight PCB 1x16 pin headers (Four male and four female).

Содержание MSP-FET430
































































































Результаты поиска

Содержание MSP-FET430

Отзывы:

Похожие инструкции для MSP-FET430

Бренды по названию

Популярные бренды

Texas Instruments MSP-FET430, Руководство пользователя

Результаты поиска

Содержание MSP-FET430

Отзывы:

Похожие инструкции для MSP-FET430

Бренды по названию

Популярные бренды