5
MSP430 board (included in the kit)
TRF6901 board
(included in the kit)
4” antenna
(not included in the kit)
1.
Plug the MSP430 board into the TRF6901 board using interface ‘A’ (per the illustration)
2.
Screw the pair of antennas to the Rx and Tx ports to the SMA connectors
3.
Connect the serial port cable to the EVM and the PC
4.
Connect a 6 to 8 V power supply to the Vcc and Gnd pins
5.
Repeat the same procedure for the other EVM setup
Interface ‘A’
Vcc
Gnd
Parallel
Port
Serial
Port
Demonstration setup for each ‘station’
