T
I C
o
n
fid
e
n
tial
–
N
D
A
R
e
s
tr
ictio
n
s
PWRGD jumper with PIN-1 connected to PGOOD and PIN-2 connected to the pullup voltage.
PIN-1 can be used as a test point to monitor the power-good indicator. This flag indicates whether
the output voltage has reached its regulation level. The LMR38020-Q1 PGOOD is an open-drain
output that is tied to voltage below 20 V through pullup resistor R
10
.
Header
(J6)
Measure V
OUT
and loop response
J6 PIN-2 (VO_S) is connected to the output for output voltage sensing and efficiency
measurement. PIN-1 (V
INJ
) is connected to the noise injection resistor R3. The loop response
can be measured on J6.
LMR38020-Q1 Evaluation Module
6
LMR38020QEVM User Guide
Copyright © 2021 Texas Instruments Incorporated