Texas Instruments HD3SS3220, Руководство пользователя

Страница: 5 / 11

USB Host
T
y
p
e
C
T
y
p
e
C
HD3SS3220 UFP Dongle
EVM
T
y
p
e
-A
USB UFP Device
USB3 Flash
www.ti.com
HD3SS3220 UFP EVM Quick Start Guide
5 SLLU241 – May 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
HD3SS3220 UFP Dongle Evaluation Module
3 HD3SS3220 UFP EVM Quick Start Guide
3.1 USB Connection
Use the following steps to connect the USB:
1. Connect the HD3SS3220 UFP dongle to a DFP through the USB Type-C connector of the HD3SS3220
UFP dongle EVM. VBUS from the DFP system must not exceed vSafe5V.
2. Upon connection, the green LED (D5) should illuminate.
3. Connect a USB device to the Type-A receptacle port of the dongle EVM.
Upon connection to a Type-C UFP device, LEDs D3, D2, or D1 should illuminate per the mode of
operation defined in
Section 2.5 .
Figure 4 illustrates an example configuration.
A Type-C DFP device is connected to the dongle EVM via a cable through the USB Type-C receptacle
port (J2). A USB device is connected to the USB Type-A receptacle port (J1).
Figure 4. Example Configuration