Texas Instruments H.264 High Profile Encoder, Руководство пользователя

Страница: 37 / 139

Installation Overview
2-17
##################################################################################
intraCodingPreset = 1 # 0 => deafult values, 1 => user defined
enableIntraPartition = 4 # 0 => INTRA_PARTITION_NONE , 1 =>
INTRA_PARTITION_ISLICES, 2 =>
INTRA_PARTITION_IPSLICES, 3 =>
INTRA_PARTITION_IBSLICES, 4 =>
INTRA_PARTITION_IPBSLICES
intraRefreshMethod = 0 # IH264_INTRAREFRESH_NONE = 0,
IH264_INTRAREFRESH_CYCLIC_MBS = 1
intraRefreshRate = 0 # Rate at which intra MB Refresh is done.
constrainedIntraPredEnable = 0 # Controls the intra MB coding in inter slices
##################################################################################
# Entropy Coding Mode
##################################################################################
entropyCodingMode = 1 # Enropy coding type, (0 => CAVLC, 1 => CABAC)
##################################################################################
# Slice Mode Configuration
##################################################################################
sliceCodingPreset = 0 # 0 => deafult values, 1 => user defined
streamFormat = 0 # format (0 =>Byte stream format, 1 => NALU stream format)
sliceMode = 0 # Type of slice coding, (0 => frame based, 1 => Slices are
controlled based upon number of Macroblocks
sliceUnitSize = 0 # Number of macroblocks per slice
##################################################################################
# Loop Filter Control
##################################################################################
loopfilterPreset = 1 # 0 => deafult values, 1 => user defined
loopfilterDisableIDC = 2 # (0=Filter, 1= NoFilter, 2 = No filter across slices)
filterOffsetA = 0 # Alpha offset for loop filter
filterOffsetB = 0 # Beta offset for loop filter
##################################################################################
# VUI Control Params
##################################################################################
vuiCodingPreset = 0 # 0 => deafult values, 1 => user defined
aspectRatioInfoPresentFlag = 1 # Controls the insertion of aspect ratio
information in VUI part of bit-stream
aspectRatioIdc = 1 # Aspect ratio ID
videoSignalTypePresentFlag = 0 # insertion of video signal type in VUI part of
bit-stream
videoFormat = 2 # Video signal type
videoFullRangeFlag = 0 # Flag to specigy Range of the pixels
colourDescriptionPresentFlag = 1 # Specifies whether colour_primaries,
transfer_characteristics and
matrix_coefficients are present or not.
colourPrimaries = 5 # Indicates the chromaticity coordinates of the
source primaries(Table E-3 in standard)
transferCharacteristics = 5 # Indicates the opto-electronic transfer
characteristic of the source picture(Table E-4 in
standard)
matrixCoefficients = 5 # Describes the matrix coefficients used in deriving
luma and chroma signals from the green, blue,and
red primaries(Table E-5 in standard)
timingInfoPresentFlag = 1 # Controls the insertion of timing info related
parameters in VUI part of bit-stream
##################################################################################
# MISC