3 Errata
Current revision of controlCARD as of 3/20/2020: PCB rev - A , ASSY rev - none
3.1 Warnings, Notes, and Errata
• The F280025C Experimenter’s Kit ships with a USB cable and is designed to be powered via USB. However,
in extreme cases the board/controlCARD may require more power than the 5 V @ 500 mA (USB 3.0 - 900
mA) that a computer’s USB port can provide. This is especially true when additional circuitry has been added
to the docking station. In such cases, it is recommended to use an external 5 V power supply (2.5 mm inner
diameter x 5.5 mm outer diameter) and plug it into J1. A compatible supply such as:
– Phihong PSAC05R-050(P)-R-C2 + Phihong RPBAG
3.2 Warnings About Specific controlCARD Revisions
MCU072E1
• 1.2-V and 3.3-V monitor pins (HSEC pins 118 and 119, respectively) were not implemented
MCU072A
• None
Errata
4
TMS320F280025C controlCARD Information Guide
SPRUIR3B – SEPTEMBER 2019 – REVISED JUNE 2022
Copyright © 2022 Texas Instruments Incorporated
