2 Hardware Quick Setup Guide
WARNING
When the controlCARD is used in a high-voltage setup, it is the user’s responsibility to confirm that
the voltages and isolation requirements are identified and understood prior to energizing the board
or simulation. When energized, the controlCARD or components connected to the controlCARD
should not be touched. Furthermore, the capacitor C26:A should be removed to minimize the
possibility of leakage current flowing across the isolation barrier of the controlCARD.
1. Connect and power embedded emulator.
a. Connect USB-B "mini" connector to J1:A
2. Provide power to the isolated F280025C device.
a. Insert the TMDSCNCD280025C controlCARD into a
station.
b. Connect USB-B "mini" connector to J17 of the
c. Flip S1 to the "USB-ON" position. D3 of the controlCARD should illuminate.
3. For a detailed explanation of the hardware configuration, see
.
Hardware Quick Setup Guide
SPRUIR3B – SEPTEMBER 2019 – REVISED JUNE 2022
TMS320F280025C controlCARD Information Guide
3
Copyright © 2022 Texas Instruments Incorporated
