Texas Instruments DVEVM, Руководство по началу работы, Страница: 51 / 70

Changing the Video Input/Output Methods
Additional Procedures A-7
A.2.2 Using S-Video Output
To switch to higher-quality S-Video output, follow these steps:
1) Unplug the composite video connector. Then, connect your S-Video
connector to the S-Video output port, which is to the right of the
currently-used composite video output port.
The DVEVM kit does not include an S-Video cable. In addition, you
will need a video display with an S-Video input.
2) On the kernel command line, you can configure the DVEVM to select
both NTSC vs. PAL and the S-Video output format (see Section
4.3.6,
Configuring the Boot Setup for PAL Video Users ). For
example, if you want both NTSC and S-Video output, use the
following:
video=dm64xxfb:output=ntsc:format=s-video
If you want both PAL and S-Video, use the following:
video=dm64xxfb:output=pal:format=s-video
S-Video
OUT