Texas Instruments DRV10964, Руководство пользователя

Страница: 3 / 15

www.ti.com
DRV10964 On-Board Connections
3 SLAU675 – February 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV10964 Evaluation Module
3 DRV10964 On-Board Connections
3.1 Power Input
The DRV10964 requires an external power supply (2.1 V to 5.5 V) to operate. Connector J1 provides the
required interface for the external power supply. The pin assignment of terminal P1 is as follows:
Table 1. DRV10964
Pin Description
1 VCC
2 GND
3.2 Interface Connectors (J4) for Phases of Motor
Connector J4 is used to interface the U, V, and W phases. The pin assignments are as follows:
Table 2. Connector P2: 3-Terminal Connector to
Connect 3-Phase BLDC Motor
Pin Description
1 Phase-W
2 Phase-V
3 Phase-U
3.3 TLC555 Pins
Table 3 lists the TLB555 pin descriptions.
Table 3. TLC555 Pins
Pin Description
1 GND
2 TRIG
3 OUT
4 RESET
5 CONT
6 THRES
7 DISCH
8 VCC