Texas Instruments BQ76PL536EVM-3, Быстрый старт, Страница: 15 / 24

www.ti.com
PLOTTING
LOAD REGISTER FILE will cause the registers to be pre-loaded with the contents of the file named in
the box. This file should be the one saved by the File | Save Registers menu selection. This feature can
be used to quickly reload a specific configuration back to the devices under test.
BLINK LED’S causes the LED indicators in the Global Registers area to blink. If not checked, they stay
illuminated RED under error conditions.
APPLY FILTER must be checked for the filtering available in the Tools menu to be operable. When un-
checked, the filter is off (set to 1). Newer versions of the WinGUI (2.1.12 and later) have deleted this
option, the filter is controlled directly (and only) from the
Tools | Filter menu.
7 PLOTTING
7.1 PLOT MENU
The plot menu allows setting up a simple strip-chart recorder for simple data captures. The data captured
to the plot are not automatically captured in a log file. The data are available for use or saving in a variety
of formats while the program is running. The plotted data are lost if the program is exited without saving.
Logged data are preserved in a file.
VIEW PLOT replaces the registers display with the plotter view. It is identical to
checking the “View Plot” checkbox in the GLOBAL REGISTERS / LED display area.
RESET completely resets the plotter interface, restoring display defaults and clearing all stored data.
DISABLE CHANNEL opens another menu level and allows removal of data channels from the plot.
VIEW MARKERS displays a tick at each poll, helping to distinguish polls which return invalid or corrupt
data from successful polls.
7.2 Plot View
Figure 8. Magnified Window View of the Effect of Cell Balancing for Cells 1-3-5.
15 SLUU437D – October 2010 – Revised July 2015 bq76PL536A and bq76PL536A-Q1 EVM Quick Start Guide
Submit Documentation Feedback
Copyright © 2010–2015, Texas Instruments Incorporated