Software
Although commands in scripts are processed sequentially, some inter-command delay occurs due to
processing time, PC operating-system-introduced delays, and so forth. If additional inter-command delays
are desired (for example, to allow a sampling process to complete before sending another command),
then the scripting processor allows for the addition of inserted delays. The syntax for this additional delay
is DELAY time_in_milliseconds. A sample of this inserted delay is seen in the example in
.
Figure 41. Example Script with Delay
7.16 Shutting Down
To shut down, first click the
Balance Off
button then click the
Poll Stop
button. The GUI goes into idle
state. To exit the GUI, either click the
Exit
button in the lower right-hand corner of the GUI or click the ‘X’
window close box.
Remove the battery connections in reverse order to the sequence used during power up. (for example,
remove BAT16S, BAT15 down through BAT1, BAT0S, and then BAT16 and BAT0).
52
bq76PL455EVM and GUI User Guide
SLUUBA7A – April 2015 – Revised July 2015
Copyright © 2015, Texas Instruments Incorporated
