Texas Instruments BQ25720, Руководство пользователя, Страница: 7 / 24

7. Install jumpers as indicated in Table 1-2 .
After completing these steps, the test setup for BMS035 is as shown in Figure 2-2 .
Figure 2-2. Original Test Setup for BMS035 (BQ2572x EVM)
8. Turn on the computer and power supply #1. Open the bqStudio software.
a. Select Charger and click the Next button.
b. For SMBus BQ25720, select “Charger_1_00_BQ25720.bqz” on the Select a Target Page . For I
2
C
BQ25723, select “Charger_1_00_BQ25723.bqz” on the Select a Target Page .
c. After selecting the target device, click the Read Register button and the interface in Figure 2-3 is
presented.
www.ti.com Test Summary
SLUUC74 – MAY 2021
Submit Document Feedback
BQ25720, BQ25723 Evaluation Module 7
Copyright © 2021 Texas Instruments Incorporated