Re-Programming the EEPROM of the TPS652170 Device
21
SLVUBH6 – November 2018
Copyright © 2018, Texas Instruments Incorporated
Software Instructions
Figure 20. Manually Writing EE_PROG_BIT to Re-Program EEPROM
Figure 21. Automatically Writing EE_PROG_BIT to Re-Program EEPROM
•
Now the BOOSTXL-TPS652170 board can be reset by moving SW1 (labeled
PWR
) to the
OFF
position and then moving it back to the
ON
position. Click
Read All
on the IPG-UI to verify that all of
the registers programmed into the EEPROM has been re-programmed correctly.
and
show all of the registers that have been re-programmed in this example, as well as the
volatile bits that have changed after power cycling the TPS652170 device.
