Re-Programming the EEPROM of the TPS652170 Device
20
SLVUBH6 – November 2018
Copyright © 2018, Texas Instruments Incorporated
Software Instructions
Figure 19. Modifying Sequence (SEQ3-4, SEQ6) Registers
•
To re-program the EEPROM of the TPS652170 device and make these changes permanent, a special
bit named
EE_PROG_BIT
must be set to 1b in the
TEST_EEP_ADDR
register (0x2C). This register
and other special registers can be found in the
Test Registers
tab of the GUI.
shows how to
enter programming mode manually and
shows how to use the IPG-UI to automatically re-
program the EEPROM memory of the TPS652170 device. When the programming mode is entered
manually, the
EE_PROG_BIT
must be reset to 0b to exit programming mode.
