Texas Instruments BoosterPack IWR1642BOOST, Руководство пользователя

Страница: 13 / 24

www.ti.com
Hardware
13 SWRU521A – May 2017 – Revised December 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
IWR1642 Evaluation Module (IWR1642BOOST) Single-Chip mmWave
Sensing Solution
2.7 Jumpers, Switches, and LEDs
2.7.1 Sense-on-Power (SOP) Jumpers
The IWR1642 device can be set to operate in three different modes based on the state of the SOP lines.
These lines are sensed only during boot up of the IWR device. The state of the device is detailed by
Table 4 .
A closed jumpers refers to a 1, and an open jumper refers to a 0 state of the SOP signal going to the IWR
device.
Table 4. SOP Jumper Information
Reference Usage Comments
P3 SOP 2
SOP[2:0]
101 (SOP mode 5) = flash
programming
P2 SOP 1
001 (SOP mode 4) =
functional mode
P4 SOP 0
011 (SOP mode 2) = dev
mode
Figure 11 shows the SOP jumpers.
Figure 11. SOP Jumpers