AWR1443/
AWR1243
Power and 2 GPIO
LED Indicators
4 RX and 3 TX PCB Antennas
PMIC
LDO1
LDO2
QSPI
Flash
EN Control
from the MCU
Current
Measurement
5 V i/p
from jack/
MCU
Option for 3.3 V from
the MCU LaunchPad
2.3 V
1.8 V
1.3 V
1.8 V
1.2 V
3.3 V (IO)
60-Pin
HD
C
SI
2
I/
L
VD
S
L
a
n
e
s
JT
AG
+
T
ra
ce
40
Mhz
BP
C
O
N
N
UART and JTAG
SPI, UART, I2C,
Rst, Nerrs, SOP,
Loggers, CAN,
GPIOs
XDS110
PC Interface
Over USB
CAN
SOP
Jumpers
Copyright © 2017, Texas Instruments Incorporated
Hardware
8
SWRU507 – May 2017
Copyright © 2017, Texas Instruments Incorporated
AWR1443BOOST, AWR1243BOOST (BoosterPack™)
2.1
Block Diagram
Figure 3. BoosterPack™ Block Diagram
2.2
Connecting BoosterPack™ to LaunchPad™ or MMWAVE-DEVPACK
This BoosterPack can be stacked on top of the Launchpad, or the
, using the two
20-pin connectors. The connectors do not have a
key
to prevent the misalignment of the pins or reverse
connection. Therefore, ensure reverse mounting does not take place. On the AWR1443 BoosterPack, we
have provided 3V3 marking near pin 1 (see
). This same marking is provided on compatible
LaunchPads which must aligned before powering up the boards.
Figure 4. 3V3 and 5-V Mark on the LaunchPad™ (White Triangle)
