Texas Instruments AFE5807EVM, Руководство пользователя, Страница: 2 / 36

Overview
www.ti.com
12 AFE5807/08EVM Jumper Locations
....................................................................................
21
13 Vcntl
.........................................................................................................................
22
14 AFE5807/08EVM LED Location
.........................................................................................
23
15 AFE5807/08EVM Test Point Locations
.................................................................................
24
16 Top Layer - Signal
.........................................................................................................
25
17 Second Layer - Ground
...................................................................................................
26
18 Third Layer - Power
.......................................................................................................
27
19 Fourth Layer - Signal
......................................................................................................
28
20 Fifth Layer - Ground
.......................................................................................................
29
21 Bottom Layer - Signal
.....................................................................................................
30
List of Tables
1 Configuration for Clock Capacitors
......................................................................................
14
2 Input/Output, Power, and USB
..........................................................................................
20
3 CW Mode, ADC Clock
...................................................................................................
21
4 CW Mode and Vcntl
.......................................................................................................
22
5 LED Indicators
.............................................................................................................
23
6 Test Points
.................................................................................................................
24
7 Bill of Materials
.............................................................................................................
31
1 Overview
This document is intended to guide users step-by-step through the AFE5807/08EVM Evaluation Module
(EVM) setup and test . The EVM is shipped with a default configuration from the manufacturer. With this
configuration, the onboard CMOS clock is used for a analog-to-digital converter sampling clock; the
onboard oscillator is used for CW mode operation. No external clock generator is required. Users need to
provide the input signal for measurement from a signal generator.
Detail explanation regarding the jumpers, connectors, and test points appear in Section 12 . The graphical
user interface (GUI) can be downloaded from the TI Web site.
2 Default Configuration
Figure 1 shows the default configuration of the EVM from the factory. The accompanying list identifies the
basic components on the EVM board.
2 AFE5807/08EVM (Rev D) Evaluation Module SLOU309 – December 2010
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated