ADSxx53EVM-PDK Kit Operation
6.4
Device Registers
In addition to the ADSxx53EVM Settings page, the GUI also allows access to the SCLK frequency settings
and the ADSxx53 device register settings on the
Device Registers
page of the GUI. Use the EVM software
to change the following register settings of the configuration register (CFR):
•
INPUT_RANGE (CFR.B9)
•
INM_SEL (CFR.B7)
•
REF_SEL (CFR.B6)
•
STANDBY (CFR.B5)
Use the EVM software to also program the REFDAC register settings. See
or the
for more information.
shows the
Device Registers
page of the GUI.
Figure 24. Device Registers Page
6.5
Capturing Data with the ADSxx53EVM-PDK
Access the
Data Monitor
page in the GUI to monitor data acquired by the ADSxx53. This GUI page
displays the acquired data versus time. To access the
Data Monitor
page, hover over the red arrow at the
left-center side of the GUI screen; a menu with different GUI pages appears. Click on the
Data Monitor
option in the menu, as shown in
Figure 25. Open the Data Monitor Page on the GUI
22
ADS8353EVM-PDK and ADS7853EVM-PDK
SBAU210A – June 2014 – Revised August 2014
Copyright © 2014, Texas Instruments Incorporated