Texas Instruments ADS7853EVM-PDK Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 41

Texas Instruments ADS7853EVM-PDK Скачать руководство пользователя страница 12

ADSxx53EVM-PDK Initial Setup

5.2

Software Installation

This section presents the steps required to the install the software.

explains how to operate the

software to acquire data.

NOTE:

The ADSxx53EVM-PDK with

ADSxx53 PWB Board revision A

includes (1) microSD card.

Ensure the microSD memory card included in the kit is installed in the microSD socket on the
back of the simple capture card board before connecting the EVM to the PC. Otherwise, as a
result of improper boot up, Windows cannot recognize the ADSxx53EVM-PDK as a
connected device.

The ADSxx53EVM-PDK with

ADSxx53 PWB Board revision C

includes (2) microSD cards.

Ensure both microSD memory cards that contain the software are installed in the microSD
sockets on the back of the simple capture card board and on the back of ADSxx53EVM
board respectively. Otherwise, as a result of improper boot up, Windows cannot recognize
the ADSxx53EVM-PDK as a connected device.

Complete the following steps to install the software:

Step 1.

Verify the microSD memory card(s) are installed:

•

ADSxx53EVM PWB revision A: This PDK kit version includes (1) microSD Card. Verify
the microSD memory card is installed on the simple capture card controller board.

•

ADSxx53EVM PWB revision C: This PDK kit version includes (2) microSD Cards. Ensure
both microSD memory cards are installed in the microSD sockets on the back of the
simple capture card board and ADSxx53EVM board respectively.

Step 2.

Verify jumpers are in the factory-default position and connect the hardware

Step 3.

Install the ADSxx53EVM-PDK software.

Step 4.

Complete the simple capture card device driver installation.

Each task is described in the following subsections.

5.2.1

Verify the microSD Memory Card is Installed on the Simple Capture Card Controller Board

The ADSxx53EVM-PDK includes the micro SD card(s) that contain the EVM software and simple capture
card controller board firmware required for the EVM operation.

NOTE:

Ensure the microSD memory card is installed in the microSD socket (P6) on the back of the

simple capture card board.

illustrates the bottom view of the simple capture card controller board with the

microSD card installed.

12

ADS8353EVM-PDK and ADS7853EVM-PDK

SBAU210A – June 2014 – Revised August 2014

Submit Documentation Feedback

Copyright © 2014, Texas Instruments Incorporated

«
...
10
11
12
13
14
...
»

Содержание ADS7853EVM-PDK










































Отзывы:

Нет отзывов