Quick Start
www.ti.com
4
SBAU197A – February 2012 – Revised January 2016
Submit Documentation Feedback
Copyright © 2012–2016, Texas Instruments Incorporated
ADS1x7xEVM-PDK
2
Quick Start
This section provides a QuickStart guide to quickly begin evaluating the ADS1x7xEVM with ADCPro.
2.1
Default Jumper/Switch Configuration
Figure 1
shows the jumpers found on the EVM and the respective factory default conditions for each.
Figure 1. ADS1x7xEVM Default Jumper Locations
Table 2
lists the jumpers and switches and the factory default conditions.
Table 2. Default Jumper/Switch Configuration
Switch
Default Position
Switch Description
S1
All OFF (Down)
Power-down channel DIP switches (Hardware control)
S2
All OFF (Down)
Mode, Format, and CLKDIV DIP switches (Hardware
control)
S3
INT (Right)
On-board voltage reference selected
S4
Header connected to converter (Left)
Channel 4 header connected to converter (not
buffered)
S5
Header connected to converter (Left)
Channel 3 header connected to converter (not
buffered)
S6
[1-2], [4-5], [7-8], [10-11]
Jumpers installed to select FS serial interface format
S7
Header connected to converter (Left)
Channel 2 header connected to converter (not
buffered)
