Texas Instruments ADC12DJ5200RF, Руководство пользователя

Страница: 18 / 31

Low-Level Control
www.ti.com
18 SLAU640 – April 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Device Configuration
4.3 Low-Level Control
The Low Level View tab, illustrated in Figure 4-1 , allows configuration of the devices at the bit-field level.
At any time, the controls in Table 4-2 can be used to configure or read from the device.
Table 4-2. Low-Level Controls
Control Description
Register map summary Displays the devices on the EVM, registers for those devices, and the states of the registers
• Clicking on a register field allows individual bit manipulation in the register data cluster
• The value column shows the value of the register at the time the GUI was last updated
• The LR column shows the value of the register at the time the register was last read
Write register button Write to the register highlighted in the register map summary with the value in the Write Data field
Write all button Update all registers shown in the register map summary with the values shown in the Register Map
summary
Read register button Read from the register highlighted in the Register Map summary and display the results in the
Read Data field
Can be used to re-synchronize the GUI with the state of the hardware
Read-all button Read from all registers in the Register Map summary and display the current state of the hardware
Load Configuration button Load a configuration file from disk and register address/data values in the file
Save Configuration button Save a configuration file to disk that contains the current state of the configuration registers
Register Data cluster Manipulate individual accessible bits of the register highlighted in the register map summary
Individual register cluster with
read or write register buttons Perform a generic read or write command to the device shown in the Block drop-down box using
the address and write data information
Figure 4-1. Low-Level Register Control Tab