www.ti.com
Low-Level Control
17
SLAU701 – May 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Device Configuration
4.3
Low-Level Control
The
Low Level View
tab, illustrated in
Figure 4-1
, allows configuration of the devices at the bit-field level.
At any time, the controls in
Table 4-2
can be used to configure or read from the device.
Table 4-2. Low-Level Controls
Control
Description
Register map summary
Displays the devices on the EVM, registers for those devices, and the states of the registers
• Clicking on a register field allows individual bit manipulation in the register data cluster
• The value column shows the value of the register at the time the GUI was last updated
• The LR column shows the value of the register at the time the register was last read
Write register button
Write to the register highlighted in the register map summary with the value in the
Write Data
field
Write all button
Update all registers shown in the register map summary with the values shown in the
Register Map
summary
Read register button
Read from the register highlighted in the
Register Map
summary and display the results in the
Read Data
field
Can be used to re-synchronize the GUI with the state of the hardware
Read-all button
Read from all registers in the
Register Map
summary and display the current state of the hardware
Load Configuration
button
Load a configuration file from disk and register address/data values in the file
Save Configuration
button
Save a configuration file to disk that contains the current state of the configuration registers
Register Data
cluster
Manipulate individual accessible bits of the register highlighted in the register map summary
Individual register cluster with
read or write register buttons
Perform a generic read or write command to the device shown in the
Block
drop-down box using
the address and write data information
Figure 4-1. Low-Level Register Control Tab