www.texas.dk
14
Activate the auger using the left handle. This must be pressed as long as you work the
machine.
5. Stopping the machine
Release the handle on the left side. Then release the handle used for making the machine
move.
To avoid the engine freezing and problems starting the engine, you must leave the engine
running for 5 minutes, when your work has been completed. In this way all moisture will
disappear that would otherwise cause starting problems.
Turn off the machine by turning the ON/OFF switch to OFF:
6. Tips regarding the clearing of snow
Use the machine as soon as it has stopped snowing. If you wait, the bottom layer of the
snow will become ice. This will make the work more difficult.
If possible you should use the machine with the wind in your back.
Clear the snow in a way so that the track you make overlap the next.
The way you adjust the funnel has an effect on the distance the snow is blown. The
steeper the angle, the longer the distance.
7. Specifications
Model
Snowbuster 560
Engine effect
5 hp
Revolutions
2700 / min
Tank capacity
2,5 l
Engine oil
SAE-30
Gear grease
Multifak Ep0
Weight
75,00 kg
No. gear
5 forwards / 2 backwards
Cleared area
56 cm
Cleared height
51 cm
Capacity
1700 m
2
/time