www.texas.dk
13
The supplied security bolts are spare for the auger, as they may brake when driving into
something hard.
Fill with engine oil, type SAE-30 0,6 l..
Check the tire pressure and adjust. (approx. 1 bar).
Tank gasoline, unleaded octane 95.
4. Starting the machine
Check the oil level.
Check that all bolts and nuts are securely fastened.
Adjust the shoes, to ensure that dirt, rocks, or other objects are not picked up from the
ground.
Point the funnel in the direction where you want the snow to be blown.
Start the engine by opening the fuel cock (below the choke) press the throttle and turn the
ON/OFF switch to ON. Activate the choke, if the engine is colt. Pull the starting cord slowly
until you feel resistance. Then pull quickly and hard. Do net let the starting cord jump back
by itself, put let it back in a controlled way. When the engine is started turn off the choke
slowly. Let the engine get warm before using it.
Choose the gear in which you want to go. Activate the clutch. Start in a slow gear, in-
crease gradually. The same applies to the reverse gear. Always use a gear the is suitable
for the amount of snow. Low gear for a lot of snow, a higher gear when the amount of
snow is little.
Fit the bracket in the discharger as
shown in the picture. The bracket
works as security..
