TAMC890 User Manual Issue 1.0.0
Page 11 of 20
5 Installation
5.1 AMC Module Insertion & Hot-Swap
5.1.1 Insertion
Handle
Blue LED
Description
Open (Full extracted)
OFF
Insert Module into slot
Open (Full extracted)
ON
Module is ready to attempt activation
Closed (Pushed all way in)
Long Blink
Hot-Swap Negotiation
Closed (Pushed all way in)
OFF
Module is ready & powered
Table 5-1 : AMC Module Insertion
When the blue LED does not go off, but returns to the “ON” state, the module FRU information is invalid or
the carrier cannot provide the necessary power.
5.1.2 Extraction
Handle
Blue LED
Description
Pulled out 1/2
OFF
Request Hot-Swap
Pulled out 1/2
Short Blink
Hot-Swap Negotiation
Pulled out 1/2
ON
Module is ready to be extracted
Open (Full extracted)
ON
Extract Module from slot
Table 5-2 : AMC Module Extraction