![Tews Technologies TAMC890 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/tews-technologies/tamc890/tamc890_user-manual_1093661007.webp)
TAMC890 User Manual Issue 1.0.0
Page 7 of 20
2 Technical Specification
AMC Interface
Mechanical Interface
Advanced Mezzanine Card (AMC) Interface confirming to
PICMG® AMC.0 R2.0
Single, Mid / Full Size Module
Electrical Interface
PICMG® AMC.2 Type E2 and Type 4 Interface
6 additional GbE Ports on AMC port 12-15, 17 and 18
IPMI
IPMI Version
1.5
Front Panel LEDs
Blue Hot-Swap LED
Red Power Good LED (LED1)
Green IP-Activity USER LED (LED 2)
16 x Link / Status LED
On Board Devices
Ethernet-Switch
16-Channel 10/100/1000 Mbit/s Ethernet-Switch
Broadcom BC5396
Gigabit Ethernet PHY
Broadcom BCM5464R
I/O Interface
Number of Channels
Number of Channels
Sixteen 10/100/1000 Mbit/s Ethernet Ports
12 x 1.25G-SerDes/SGMII ports (AMC backplane ports)
4 x RJ45 front panel ports
I/O Connector
Front I/O:
4 x RJ45 - Würth (615 032 137 821)
Physical Data
Power Requirements
800mA typical @ +12V DC (Payload Power)
35mA typical @ +3.3V DC (Management Power)
Temperature Range
Operating
Storage
0 °C to +70 °C
-40°C to +125°C
MTBF
TAMC890-10R/11R: 5240000h
MTBF values shown are based on calculation according to MIL-HDBK-217F and
MIL-HDBK-217F Notice 2; Environment: G
B
20°C.
The MTBF calculation is based on component FIT rates provided by the
component suppliers. If FIT rates are not available, MIL-HDBK-217F and
MIL-HDBK-217F Notice 2 formulas are used for FIT rate calculation.
Humidity
5 – 95 % non-condensing
Weight
110 g
Table 2-1 : Technical Specification