Basic Operation
Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 47743
12
b2.
PI SOUND/PI MUTE
PI SOUND mode: When driving in built up areas you may experience
different PI sounds which will be heard for less than a second. This is due
to different PI codes being received from the same AF source (reflecting
signals).
PI MUTE mode: Rather than hearing different sounds the radio will mute
for less than a second.
b3.
RETUNE LONG/RETUNE SHORT
The amount of time before an automatic TA or PI search is enabled.
When PI information is not received for the selected amount of time the
radio will start to retune to the next available PI station. If no PI station is
found the radio will go back to the previous station and wait 4-5 minutes
until the PI code is received.
RETUNE L: 150 Seconds.
RETUNE S: 90 Seconds.
b4.
MASK DPI/MASK ALL:
MASK DPI mode: Masks only the AF which has different PI.
MASK ALL mode: Masks the AF which has different PI and NO RDS
signal with high field strength.
b5.
BEEP ON/BEEP OFF
BEEP ON mode: A beep is sounded when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
b6.
VOL LAST/VOL DEFA
VOL LAST mode: The radio switches on at the actual volume it was when
it was switched off.
VOL DEFA mode: After pressing SEL button, AVOL will be displayed.
Then you can pre-select a constant switch-on volume by using the VOL
dial.
b7.
CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when powered off.
b8.
CLK 12/24
CLK 12: Clock displays in 12 hour mode.
CLK 24: Clock displays in 24 hour mode.
3.
POWER ON/OFF
When the unit is off you can turn the unit on by pressing any button on
the fascia apart from the open button. You can also turn the stereo on by
inserting a disc, SD Card or USB Stick. To turn the stereo off pres and
hold the power button.
