Basic Operation
Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 47743
11
1.
OPEN BUTTON
Press the OPEN button to fold down the fascia panel.
Then a disc can be inserted into the disc slot or ejected by pressing the
EJECT button.
After flipping down the fascia panel, push it towards the left, then pull the
right side of the panel towards you to remove it from the main chassis.
2.
SEL BUTTON (Select) and VOL DIAL
a.
Press the SEL button briefly to cycle through the following options.
>VOLUME>BASS>TREBLE>BALANCE>FADER>
To change the setting of your selection simply turn the VOL dial until you
reach your desired level and press the SEL button to confirm your
selection. To exit the menu simply wait 5 seconds and the display will
return to tuner or CD mode.
b.
If you press and hold the SEL button for around 2 seconds you are able
to cycle through the following options.
>TA (ALARM/SEEK)>PI (SOUND/MUTE)>RETUNE
(LONG/SHORT)>MASK (DPI/ALL)>BEEP (ON/OFF)>USER SET
(FLAT/CLASSIC/ROCK/POP)>VOL (LAST/DEFA)>MONO/STEREO (FM
MODE ONLY)>LOUD (ON/OFF)> LOCAL/DX (FM MODE ONLY)>CLK
(ON/OFF)>CLK (12/24)
After selecting the desired mode simply turn the VOL dial to select your
preferred choice.
b1.
TA SEEK/TA ALARM:
TA SEEK mode: When a newly tuned radio station does not receive TP
information for 5 seconds, the radio retunes to the next station which has
a different PI to the last station, but has the TP information.
When TP information is no longer available for the current station it will
start to retune in 90 seconds or 150 seconds depending on your
RETUNE LONG/SHORT setting.
TA ALARM mode: When this mode is selected the auto retune function is
not available. Only a double beep (ALARM) will be heard. When a newly
tuned radio station does not have TP information for 5 seconds, beeps
are sounded.