Version: Leo 18 GT_GB_02-2008
43
/
23
2.
Starting of the
Kubota
engine (Option)
-
The filling up of fuel tank of the explosive engine
-
The switching in of electric supply of the Kubota engine (3) (O
→
I)
I.
Ignition of the explosive engine from the bottom
Starting up/stopping the KUBOTA ENGINE (option), you can do it with the
turning switch which can be found
a., Starting up/stopping the KUBOTA ENGINE (option), you can do it
with the turning switch (5) which can be found on the control box located
nearby the electric switchboard.
a., Switch on the key switch (3)
b., The heating/ignition is needed with the yellow press-button (4) in the
case of cold starting, until the yellow lamp goes out.
c., Ignition with the start turning switch (5)
There is one red telltale on the control panel for the controlling of the oil pressure (1) and
there is one for the controlling of the degree of the water temperature (2).
The control stops the engine automtically if the degree of the water temperature marking
lights.
II.
Starting the Kubota engine from the control panel of the basket:
a., Switch on the key switch (4)
b., The starting up/stopping of the Honda engine with the turning switch (1)
which can be found on the control panel.
To start the cold engine, push the yellow choke button in bottom control
panel the basket, during starting with the start button.
Ignition of the Kubota
engine
:
1.Oil pressure alarm
2. Water temperature
alarm
3. Key switch
4. Ignition
5. Kubota engine
