Version: Leo 18 GT_GB_02-2008
43
/
17
ATTENTION!
The adjusting and the fasten bolted connections of the safety
devices are fixed with paint or lead by the manufacturer.
These fixations can be broken up by the owner or operating only
for his or her own danger or responsibility.
The manufacturer will not undertake responsibility for those
warranty and accident consequents which have originated from
the breaking up.
ATTENTION!
Switches, which are controlling the proper levelling and aligning
the machine, are adjusted by the manufacturer. It is strictly
prohibited to readjust, reprogram these sensors or to implement
further electric connections. The manufacturer will not undertake
responsibility for those warranty and accident consequents
which have originated from the above activities.
ATTENTION!
If the basket sensor or any stabilizing sensor give alarm signal
during operation (red light lights up on the control panel of the
basket), the elevating machine can only be moved to the trans-
port direction and the machine is only allowed to use for lifting
after eliminating the operating trouble.
ATTENTION!
During operating the machine the key switch of the basket must
be in switched on position and the emergency stop buttons must
be in released position to ensure proper operation of the voice
and and light alarm signals.
Switching off the above mentioned switches is only allowed in
emergency situation or during setting the basic position of the
machine.
4. HANDLING AND USAGE OF THE MACHINE
4.1 Transporting of the machine
ATTENTION!
The hoisting machine can only be transported on a suitable size
and authorized load transport vehicle on transport position.
The hoisting machine must be fixed to the platform of the
transport vehicle with bracers.
ATTENTION!
Manufacturer and distributor do not take any responsibility for
any damage or accident occurring in consequence of the
improper transporting position.
The transporting position of the machine:
