10
·
Concept S SW + R Dolby Digital/dts
Button designations and their functions
Standby
Switches the subwoofer on (press once) or off
(press again), after the power supply has been
switched on at the rear of the device (“Power” -
see page 11). A blue LED indicates that the device
is on standby.
Input
Use this button to select the input signal. The
inputs are selected in sequence each time you
press the button.
This increases the overall volume of the system.
Volume –
This decreases the overall volume of the system.
During operation the display always shows the se-
lected signal source, e.g. “coax” and the reproduc-
tion mode e.g. “AC3” = Dolby Digital. This display is
interrupted when you make any changes, such as
to the volume. As soon as this activity is ended,
the display indicates the originally selected sig-
nal source again.
Function: Subwoofer front/display
COAX AC3
