Technische Beschreibung und Bedienungsanleitung
18
·
Concept S SW + R Dolby Digital/dts
Setting up the surround system
POWER
CHANNEL
CENTER
WOOFER
REAR-L
REAR-R
SCAN
MUTE
OPT
COAX
VCR
AUX
1
4
7
2
5
8
3
6
9
10+
MEM
PC
STEREO/MONO
NIGHT MODE
LISTEN MODE
TEST
C DELAY
RESET
TUNER
S DELAY
BA
SS
TR
EB
LE
+
–
+
–
–
+
–
+
–
+
–
+
+
–
–
+
Balance
L
R
VOLUME –
{
r
p
u
Equalisation
Before familiarising yourself with the other func-
tions of the device, it is necessary to set the vol-
ume relationships of the five satellite speakers
and the bass channel for the bass speaker.
To do this, switch on the device using the “Power”
switch at the rear.
Pressing the “Standby” button on the front op-
erating panel, or pressing the “Power” button on
the remote control will put the subwoofer into
standby. Make sure that signal-emitting devices,
such as DVD players, are not active.
Increase the overall volume of the set to “70dB”
using the central “” button on the re-
mote control
u
. This sets a kind of reference
level. Make sure you are in the best possible and
most central place for listening. Press the “Test”
{
button. This activates a test tone that runs
through the five satellites and the subwoofer in
sequence. Now you can increase or decrease the
level on the remote control for the centre, the
two rear speakers and the subwoofer to the posi-
tions
r
and
p
on the remote control until the
volume of these four speakers corresponds to the
volume of the two front speakers.
Equalisation by ear requires a few attempts and
does not always provide perfect results straight
away. For perfect equalisation of the speakers
we recommend using a volume level measuring
device, available in the Teufel shop. This device
is a purchase that will last a lifetime and allows
considerably more precise equalisation than the
ear. Bass levels in particular are often set too loud
– precise adjustment is only guaranteed using a
measuring device.
The volume setting of the subwoofer may be
slightly different when playing back music com-
pared with home cinema sound, depending on
the recording quality and mixing. While a large
proportion of bass tone often dominate in effect-
rich DVDs, the required level may not be heard in
the musical area (in particular if the set has been
adjusted to optimal DVD playback). Above all, per-
sonal taste is essential for the best compromise
between the two sources. You can directly adjust
the subwoofer level as required using the buttons
“Woofer [+] and [–]”
r
on the remote control.
Press the “Test”
{
button again to complete the
calibration process.
Caution!
After successfully completing the
test, please reduce the volume
from the 70 dB setting used for
testing.
Information
The selected settings are
retained even after the device is
switched off.
