Edition: 24.06.2019
(*) harnesses belonging to a single user, which were subject to periodical inspections by experts and recorded in the Inspection Log,
carefully treated and maintained, that were stored in accordance with regulations, were not in contact with oils, greasses or aggressive
chemicals, were not used extensively, can be hold in service for up to 10 years.
PERIODIC INSPECTIONS AND CHECKS
The user must perform a visual and functional inspection of his equipment before and after each use! During use, it is important to
monitor your equipment in order to identify possible damages inflicted in use, without being aware of it. The equipment must be inspected
at least once every 12 months or more often if required, depending on the working conditions and compulsory after every incident it
has been involved in. Inspections can be carried out only by the manufacturer or by an authorised inspections center.
If the periodic inspections were not performed at least once every 12 months, were carried out by unqualified persons, or
without strictly respecting the manufacturers instructions, the warranty is lost and the manufacturer declines any
responsability related to the equipment!
MARKING
The equipment is fitted with a label which contains the following elements and essential infromation: name of the manufacturer, name
of the model, manufacturing date (month and year), standards/norms the product complies to [EN 1498 Class B], size [UNIVERSAL],
rated load [Max. 150kg], international symbol/icon for reading the instructions before use and the product’s serial number. The label
must be always present and readable!
Inspection Log!
Every rescue equipment is delivered with an Inspection Log. This document must be kept safely and sent along with the product for
every inspection.
The Log (table) contains important data regarding your equipment. The date, signature of the inspector and the results are also recorded.
The date of first use must be written in the Inspection Log by the user!
WARRANTY AND LIABILITY!
The manufacturer offers a 24 month warranty for this product from the date of first use. The user has the obligation to write the date of
first use in the Inspection Log. If the date of first use was not filled in, the warranty period will be calculated from the manufacturing date.
The warranty is applicable only for material or manufacturing defects! Damage resulting from normal wear and tear, poor maintenance
(or no maintenance at all), those resulted from carelessness, accidents, fall arrest, unauthorised repairs or modifications, wrong use or
any other reasons are NOT covered by the warranty!
Warranty claims only apply to the product. All claims by the user or any other party for the direct, indirect or any consequential damages
resulting from the use of this product are excluded from guarantee and liability assumptions. Any claims in this regard are hereby
expressly rejected.
The user must be informed regarding the dangers of work at heights and depths. He should be aware of the risks and he has to be
aware that he is the only responsible for eventual damage, accidents or even death which may result from the use of this equipment. If
the user is unable to do so or if he does not have the competence to do so, he cannot use this product.
VERTIQUAL Engineering SRL herewith rejects any liability claims for direct, indirect, accidental or consequential damages resulting
from the use of this product.
The conformity assesment procedure according to the EN 1498:2006 standard was carried out by: INCDPM (The National Research
and Development Institute for Occupational Safety-Bucharest). European notified body: NB 2756.