Teufel US 6112/6 RHD, Техническое описание и инструкция по эксплуатации, Страница: 21 / 24

• US 6112/6 RHD 21
Radio playback
Select one of the two radio reception ranges as a source
(see page 14):
FM – Reception of mono and stereo stations from 87.5 to
108 MHz, RDS mode possible.
AM – Reception of mono stations from 522 to 1.629 kHz.
Setting the radio stations
Direct entry of the tuning frequency:
• Push the button
27 “Frequ.” so that the tuning frequen-
cy appears in the display panel.
• Enter the frequency without any decimal or comma
using the number buttons 26 “1 ... 0”.
• Push the select button 41 “•”.
Station search:
• Tip the button
27 “Frequ.” so that the tuning frequency
appears in the display panel.
• Set the tuning frequency with the navigation buttons 31
“
◀
/
▶
” :
Manually : Every time the button is tipped, the fre-
quency is increased or decreased by one increment
(FM: 0.05 MHz, AM: 9 kHz).
Automatically : Holding down the button for a pro-
longed period of time starts station scanning in the
desired direction until a station with suffi ciently strong
transmitting power is found.
The set frequency is displayed in the display panel. If
the station is received in stereo, the indicator “
” will
also appear. If the station transmits an RDS signal, the
frequency and the name of the station will alternate on
the display panel after a short time.
Stereo/Mono
Bothersome interference may occur for weak stereo
stations in the FM area. If this occurs, you can switch
between mono and stereo reception with the button
33
“Mode”.
Station memory
The device can save 30 FM stations and 10 AM stations.
You can conveniently select the saved stations with the
push of a button.
Saving stations manually
• Set the desired station as described above.
• Push the button
34 “Mem”.
The question “Store in P xx” will appear in the display
panel.
• With the number buttons 26 “0 … 1”, enter the desired
memory slot number or select the desired number with
the navigation buttons
31 “
◀
/
▶
”.
• Push the select button 41 “•”.
• If the memory slot is already occupied, the question
“Overwrite?” will appear.
If you want to select another memory slot, push the but-
ton
32 “Return” and start from the beginning.
25
26
27
31
32
41
43
45
33
34
91796 GB 20120524.indd 21 91796 GB 20120524.indd 21 24.05.12 16:03 24.05.12 16:03