Teufel System 10 THX Ultra 2, Техническое описание и инструкция по эксплуатации

Страница: 12 / 16

12
• System 10 THX Ultra 2
Operation
Activating and deactivating
• With the switch 4 turn the mains voltage on and
off respectively. After activation the subwoofer is in
standby and the power LED 10 “Power” is red. Once
the subwoofer is activated, the Power LED is green.
You can control all other functions with the remote con-
trol:
• Turning on or entering standby mode: Push the button
14 “ ”.
• Increasing the volume: Push the button 15 “+”.
• Decreasing the volume: Push the button
17
“–”.
• Setting the volume to the THX level: Push the button
18
“THX”, the display 12 “THX” is red.
• Muting the subwoofer (mute): Push the button 19 “ ”.
The Power LED
10
“Power” blinks green.
• Reactivating the sound: Push the button
19
“ ” again
or change the volume.
Care and cleaning
Clean the subwoofer and the satellites regularly with a
soft, damp microfiber cloth. In the process, be sure to
observe the following notes:
Danger Risk of electric shock!
In contact with live parts, water can lead to
electric shock or short circuit.
• Make sure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.
Attention Risk of damage !
Using the wrong cleaning materials may dam-
age the delicate surface of the case.
• If possible only use plain water without any cleaning
products. In case of stubborn marks, a mild soap solu-
tion may be used.
• In no circumstances should caustic cleaning products,
white spirit, thinners, petrol or similar be used for
cleaning.
14
15
16
17
18
19
S 10000 SW THX
®
Ultra2
TM
6
7
10
12