7
Setup and connection
Subwoofer
Activating and deactivating
• With the switch
6
“Power” you can turn the power supply on
or off. After turning on, the subwoofer is in standby and the
power LED
10
“Power” is illuminated in red. If the subwoofer
is on, the power LED
10
“Power” will be illuminated in green.
You can control all other functions with the remote control:
• Switch on and to standby: Push the button
13
“ ”.
Note
: If the subwoofer is not deactivated with the button
13
“ ”, it will automatically switch to standby if no audio
signal is present for 20 minutes. As soon as an audio signal
is sent, the subwoofer will automatically activate for music
playback.
You can exit this auto-on mode by switching the subwoofer to
standby with the button
13
“ ”.
• Increase the volume: Push the button
14
“+”.
• Decrease the volume: Push the button
16
“–”.
• Set the volume to THX level: Push the button
17
“THX”, the
display
12
“THX” is illuminated in red.
• Mute the subwoofer: Push the button
18
“ ”. The power LED
10
“Power” flashes in green.
• Turn the sound back on: Push the button
18
“ ” again or
adjust the volume.
14
13
15
16
17
18
10
12
6
Clean the subwoofer regularly with a soft, damp microfiber
cloth. Please be absolutely sure to observe the following notes
in the process:
• If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
Cleaning and care
Danger
Risk of electric shock!
In contact with live parts, water can lead to electric
shock or short circuit.
• Make sure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.
Attention
Risk of damage!
Using the wrong cleaning materials may damage
the delicate surface of the case.
If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
In no circumstances should caustic cleaning products, white
spirit, thinners, petrol or similar be used for cleaning.
