3
Dimensions (WxHxD)
360 x 557 x 700 mm (with spikes)
Weight
41.7 kg
Operating voltage:
230 V~/50 Hz
Max. power consumption 1200 watts
Technical changes reserved!
You can find further technical data on our website.
Technical data
Preparation
Mounting the spikes
The spikes ensure that the subwoofer has a stable position,
they also minimise vibrations and provide enough space to the
floor for the subwoofer speaker.
1. Carefully turn the subwoofer over and place it on a soft, pad-
ded base.
2. Screw the threaded bolts
e
into the spikes
d
.
3. Screw the spikes into the 4 threaded holes on the bottom of
the subwoofer.
4. In the event of soft or sensitive floors, place a washer
f
under each spike.
5. The tips of the spikes may protrude somewhat in order to
compensate for irregularities in the floor.
6. Make sure that the subwoofer has a stable position to pre-
vent vibrations.
Inserting batteries in the remote control
You will need two micro-type or AAA batteries with 1.5 Volt (in-
cluded in the product contents) in order to operate the remote
control.
1. Push the small lever on the cover of the battery compart-
ment on the back side of the remote control and remove the
lid by lifting it off upwards.
2. If applicable, remove the old batteries (please follow the
notes on the reverse side).
3. Insert the batteries in the battery compartment as shown in
the figure.
4. Place the cover back on the compartment and push it
closed.
e
f
d
Check to be sure
Check that all items have been delivered and that
nothing is damaged.
If the delivery is incomplete or you find damage sustained in
transit, do not operate the device; instead contact our service
department.
a
b
c
d
e
f
g
a
1 x S 8000 SW active subwoofer
b
1 x remote control
c
1 x power cord for the subwoofer
d
4 x spikes for the subwoofer
e
4 x threaded bolts
f
4 x washers
g
2 x batteries for the remote control
This product conforms with Council of the European
Union guidelines 2004/108/EC and 2006/95/EC.
Product contents
